 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE Copyright (c) 1997, Power Innovations Limited, UK JULY 1994 - REVISED SEPTEMBER 1997 q Designed Specifically for High Frequency Electronic Ballasts Integrated Fast trr Anti-parallel Diode, Enhancing Reliability Diode trr Typically 500 ns New Ultra Low-Height SOIC Power Package Tightly Controlled Transistor Storage Times Voltage Matched Integrated Transistor and Diode Characteristics Optimised for Cool Running B B NC NC E D PACKAGE (TOP VIEW) 1 2 3 4 8 7 6 5 q C C C C q q q q NC - No internal connection SL PACKAGE (TOP VIEW) 1 2 3 q q Diode-Transistor Charge Coupling Minimised to Enhance Frequency Stability Custom Switching Selections Available Surface Mount and Through-Hole Options PACKAGE Small-outline Small-outline taped and reeled Single-in-line PART # SUFFIX D DR SL C E q q device symbol C B description The new BULDxx range of transistors have been designed specifically for use in High Frequency Electronic Ballasts (HFEB's). This range of E switching transistors has tightly controlled storage times and an integrated fast trr anti-parallel diode. The revolutionary design ensures that the diode has both fast forward and reverse recovery times, achieving the same performance as a discrete anti-parallel diode plus transistor. The integrated diode has minimal charge coupling with the transistor, increasing frequency stability, especially in lower power circuits where the circulating currents are low. By design, this new device offers a voltage matched integrated transistor and anti-parallel diode. This device is available in the now well established 8 pin low height surface mount D package, and the TO220 pin compatible SL package. Use of the SL package allows for a 40% height saving, making it ideal for compact ballast applications. absolute maximum ratings at 25C ambient temperature (unless otherwise noted) RATING Collector-emitter voltage (V BE = 0) Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage SYMBOL VCES VCBO VCEO V EBO VALUE 600 600 400 9 UNIT V V V V PRODUCT INFORMATION Information is current as of publication date. Products conform to specifications in accordance with the terms of Power Innovations standard warranty. Production processing does not necessarily include testing of all parameters. 1 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 absolute maximum ratings at 25C ambient temperature (unless otherwise noted) (continued) RATING Continuous collector current (see Note 1) Peak collector current (see Note 2) Continuous base current (see Note 1) Peak base current (see Note 2) Continuous device dissipation at (or below) 25C ambient temperature BULD25D BULD25SL SYMBOL IC ICM IB IBM Ptot IE(av) Tj Tstg VALUE 2 4 1.5 2.5 see Figure 10 see Figure 11 0.5 -65 to +150 -65 to +150 UNIT A A A A W A C C Maximum average continuous diode forward current at (or below) 25C ambient temperature Operating junction temperature range Storage temperature range NOTES: 1. This value applies for tp = 1 s. 2. This value applies for tp = 10 ms, duty cycle 2%. electrical characteristics at 25C ambient temperature PARAMETER V CEO(sus) ICES IEBO V BE(sat) VCE(sat) Collector-emitter sustaining voltage Collector-emitter cut-off current Emitter cut-off current Base-emitter saturation voltage Collector-emitter saturation voltage Forward current transfer ratio Anti-parallel diode forward voltage IC = 0.1 A VBE = 0 IC = 0 IC = 0.5 A IC = 0.5 A IC = 1A IC = 0.01 A IC = 0.5 A IC = 1A (see Notes 3 and 4) (see Notes 3 and 4) (see Notes 3 and 4) (see Notes 3 and 4) 10 10 10 0.9 0.3 0.6 18 15 15 1.5 20 20 1.7 V TEST CONDITIONS MIN 400 10 1 1.1 0.5 1 TYP MAX UNIT V A mA V V VCE = 600 V VEB = IB = IB = IB = 9V 0.1 A 0.1 A 0.2 A VCE = 10 V VCE = 1.5 V VCE = IE = 5V 1A hFE V EC NOTES: 3. These parameters must be measured using pulse techniques, tp = 300 s, duty cycle 2%. 4. These parameters must be measured using voltage-sensing contacts, separate from the current carrying contacts, and located within 1 mm from the device body for the D package and 3.2 mm from the device body for the SL package. thermal characteristics PARAMETER RJA Junction to free air thermal resistance D package SL Package MIN TYP MAX 165 115 UNIT C/W switching characteristics at 25C ambient temperature PARAMETER trr ts tf NOTE Anti-parallel diode reverse recovery time Storage time Fall time TEST CONDITIONS Measured by holding transistor in an off condition, VEB = -3 V (see Note 5) (see Note 5) (see Note 5) 2 MIN TYP 0.5 3.5 0.25 MAX 1 5 0.35 UNIT s s s 5: Refer to Figures 12, 13 and 14 for Functional Test Circuit and Switching Waveforms. PRODUCT INFORMATION 2 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 TYPICAL CHARACTERISTICS FORWARD CURRENT TRANSFER RATIO vs COLLECTOR CURRENT 30 TA = 25C IE - Instantaneous Forward Current - A hFE - Forward Current Transfer Ratio LDX25SHF ANTI-PARALLEL DIODE INSTANTANEOUS FORWARD CURRENT vs INSTANTANEOUS FORWARD VOLTAGE 10 TA = 25C LDX25DVF 10 1*0 0*1 VCE = 1.5 V VCE = 5 V VCE = 10 V 1*0 0*01 0*1 1*0 10 0*01 0 0*5 1*0 1*5 2*0 2*5 3*0 IC - Collector Current - A VEC - Instantaneous Forward Voltage - V Figure 1. Figure 2. BASE-EMITTER SATURATION VOLTAGE vs AMBIENT TEMPERATURE 1.0 VBE(sat) - Base-Emitter Saturation Voltage - V LDX25SVB IC = 0.5 A IB = 0.1 A 0.9 0.8 0.7 0.6 -50 -25 0 25 50 75 100 125 150 TA - Ambient Temperature - C Figure 3. PRODUCT INFORMATION 3 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 MAXIMUM SAFE OPERATING REGIONS MAXIMUM FORWARD-BIAS SAFE OPERATING AREA 10 BULD25D TA = 25C LDX25DFB MAXIMUM FORWARD-BIAS SAFE OPERATING AREA 10 BULD25SL TA = 25C LDX25SFB IC - Collector Current - A 1*0 IC - Collector Current - A t p = 100 s t p = 10 ms tp = 1 s 1*0 0*1 0*1 t p = 100 s t p = 10 ms tp = 1 s 0*01 1*0 10 100 1000 0*01 1*0 10 100 1000 VCE - Collector-Emitter Voltage - V VCE - Collector-Emitter Voltage - V Figure 4. Figure 5. MAXIMUM REVERSE-BIAS SAFE OPERATING AREA 5 LDX25DRB MAXIMUM REVERSE-BIAS SAFE OPERATING AREA 5 LDX25SRB 4 IC - Collector Current - A 3 IC - Collector Current - A BULD25D IB(on) = IC / 5 VBE(off) = -5 V TA = 25C 4 BULD25SL IB(on) = IC / 5 VBE(off) = -5 V TA = 25C 3 2 2 1 1 0 0 100 200 300 400 500 600 700 800 VCE - Collector-Emitter Voltage - V 0 0 100 200 300 400 500 600 700 800 VCE - Collector-Emitter Voltage - V Figure 6. Figure 7. PRODUCT INFORMATION 4 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 THERMAL INFORMATION THERMAL RESPONSE JUNCTION TO AMBIENT vs POWER PULSE DURATION ZJA/R JA - Normalised Transient Thermal Impedance 1*0 60% 40% 20% 0*1 10% LDX25DZA BULD25D TA = 25C t1 0*01 0% duty cycle = t1/t2 Read time at end of t1, t2 Z T J ( max ) - T A = P D ( peak) * JA * R JA ( max ) R JA 0*001 10-4 10-3 10-2 10-1 10 0 101 102 103 t1 - Power Pulse Duration - s Figure 8. THERMAL RESPONSE JUNCTION TO AMBIENT vs POWER PULSE DURATION ZJA/R JA - Normalised Transient Thermal Impedance 1*0 60% 40% 20% 0*1 10% LDX25SZA BULD25SL TA = 25C t1 0*01 0% duty cycle = t1/t2 Read time at end of t1, t2 Z T J ( max ) - T A = P D ( peak) * JA * R JA ( max ) R JA 0*001 10-4 10-3 10-2 10-1 10 0 101 102 103 t1 - Power Pulse Duration - s Figure 9. PRODUCT INFORMATION 5 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 THERMAL INFORMATION MAXIMUM POWER DISSIPATION JUNCTION TO AMBIENT vs POWER PULSE DURATION 100 0% Ptot - Maximum Power Dissipation - W LDX25DPA BULD25D TA = 25C 10 10% 20% 40% 60% 1*0 0*1 10-4 10-3 10-2 10 -1 100 101 102 103 t1 - Power Pulse Duration - s Figure 10. MAXIMUM POWER DISSIPATION JUNCTION TO AMBIENT vs POWER PULSE DURATION 100 0% Ptot - Maximum Power Dissipation - W LDX25SPA BULD25SL TA = 25C 10% 10 20% 40% 60% 1*0 10-4 10-3 10-2 10 -1 100 101 102 103 t1 - Power Pulse Duration - s Figure 11. PRODUCT INFORMATION 6 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 FUNCTIONAL TEST CIRCUIT Vs = 325 V BULD25 RB Cslew Ns RE Np Rload C filter T2 RB L1 Ccoupling BULD25 Ns RE IDDATBAL 0V Figure 12. COMPONENT VALUES USED IN FUNCTIONAL TEST CIRCUIT RB RE Rload Ccoupling Cslew Cfilter L1 T2 NP : NS 22 1.8 470 47 nF 1.5 nF 3.2 nF 2.5 mH 5:3 Figure 13. PRODUCT INFORMATION 7 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 FUNCTIONAL TEST SWITCHING WAVEFORMS 100% V CE 10% 0% BASE CURRENT ts 100% 90% 100% CO LLE CTOR C UR RE NT 25% 10% 0% Diode t rr tf DIODE CURRENT SWTWAV25 Figure 14. Switching Waveforms of device in Functional Test Circuit PRODUCT INFORMATION 8 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA D008 plastic small-outline package This small-outline package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. D008 5,00 (0.197) 4,80 (0.189) 8 7 6 5 Designation per JEDEC Std 30: PDSO-G8 6,20 (0.244) 5,80 (0.228) 4,00 (0.157) 3,81 (0.150) 1 2 3 4 1,75 (0.069) 1,35 (0.053) 7 NOM 3 Places 0,50 (0.020) x 45NOM 0,25 (0.010) 5,21 (0.205) 4,60 (0.181) 0,203 (0.008) 0,102 (0.004) 0,79 (0.031) 0,28 (0.011) Pin Spacing 1,27 (0.050) (see Note A) 6 Places 0,51 (0.020) 0,36 (0.014) 8 Places 0,229 (0.0090) 0,190 (0.0075) 7 NOM 4 Places 4 4 1,12 (0.044) 0,51 (0.020) ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES MDXXAA NOTES: A. B. C. D. Leads are within 0,25 (0.010) radius of true position at maximum material condition. Body dimensions do not include mold flash or protrusion. Mold flash or protrusion shall not exceed 0,15 (0.006). Lead tips to be planar within 0,051 (0.002). PRODUCT INFORMATION 9 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA SL003 3-pin plastic single-in-line package This single-in-line package consists of a circuit mounted on a lead frame and encapsulated within a plastic compound. The compound will withstand soldering temperature with no deformation, and circuit performance characteristics will remain stable when operated in high humidity conditions. Leads require no additional cleaning or processing when used in soldered assembly. SL003 10,2 (0.400) MAX 4,57 (0.180) MAX 8,31 (0.327) MAX Index Dot 12,9 (0.492) MAX 6,60 (0.260) 6,10 (0.240) 4,267 (0.168) MIN 1 2 3 Pin Spacing 2,54 (0.100) T.P. (see Note A) 2 Places 1,854 (0.073) MAX 0,356 (0.014) 0,203 (0.008) 3 Places 0,711 (0.028) 0,559 (0.022) 3 Places ALL LINEAR DIMENSIONS ARE IN MILLIMETERS AND PARENTHETICALLY IN INCHES NOTES: A. Each pin centerline is located within 0,25 (0.010) of its true longitudinal position. B. Body molding flash of up to 0,15 (0.006) may occur in the package lead plane. MDXXAD PRODUCT INFORMATION 10 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 MECHANICAL DATA D008 tape dimensions D008 Package (8 pin SOIC) Single-Sprocket Tape 4,10 3,90 8,05 7,95 2,05 1,95 1,60 1,50 0,40 0,8 MIN. 5,55 5,45 12,30 11,70 6,50 6,30 Carrier Tape Embossment o 1,5 MIN. 0 MIN. Direction of Feed 2,2 2,0 Cover Tape ALL LINEAR DIMENSIONS IN MILLIMETERS NOTES: A. Taped devices are supplied on a reel of the following dimensions:Reel diameter: Reel hub diameter: Reel axial hole: B. 2500 devices are on a reel. 330 +0,0/-4,0 mm 100 2,0 mm 13,0 0,2 mm MDXXAT PRODUCT INFORMATION 11 BULD25D, BULD25DR, BULD25SL NPN SILICON TRANSISTOR WITH INTEGRATED DIODE JULY 1994 - REVISED SEPTEMBER 1997 IMPORTANT NOTICE Power Innovations Limited (PI) reserves the right to make changes to its products or to discontinue any semiconductor product or service without notice, and advises its customers to verify, before placing orders, that the information being relied on is current. PI warrants performance of its semiconductor products to the specifications applicable at the time of sale in accordance with PI's standard warranty. Testing and other quality control techniques are utilized to the extent PI deems necessary to support this warranty. Specific testing of all parameters of each device is not necessarily performed, except as mandated by government requirements. PI accepts no liability for applications assistance, customer product design, software performance, or infringement of patents or services described herein. Nor is any license, either express or implied, granted under any patent right, copyright, design right, or other intellectual property right of PI covering or relating to any combination, machine, or process in which such semiconductor products or services might be or are used. PI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS. Copyright (c) 1997, Power Innovations Limited PRODUCT INFORMATION 12 |
Price & Availability of BULD25D
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |